top of page

Unfinished Red Oak and White Oak Planks for New York Residences: Lengths, Cuts and Formats

Nov 7
5 min read

Updated: 19 hours ago

Posted November 7, 2026

Our custom milled unfinished red oak and white oak planks compared by length range, width, cut and format for New York apartments and townhouses.

Call (908) 232-6600 or book a virtual consultation to review samples and specifications for your project.

An unfinished floor is sanded and finished on site, so the stain, sheen and final colour are chosen in the room itself rather than from a sample board. For many New York renovations, from a brownstone parlor to a full-floor apartment, that control is the reason to start with raw planks. Our unfinished wood floors include red oak and white oak in six length ranges.

This guide compares unfinished white oak and red oak by length, width, cut and format, so you can match the plank to the room and the subfloor.

Custom Milled Plank

These planks are custom milled by Luxury Wood NYC on German-made precision molders, with human and machine inspection for knots and sap. All planks are back-channeled, and the dimensional tolerance does not exceed .005" in the width or profile of any single piece, as listed for our white oak 4' to 10'.

Moisture content is between 6.5% and 8.5%, and not more than 9% in any single board. The planks are listed in Select and Better grade, and our Select grade is similar to the Clear grade specified by NOFMA and NWFA. Other grades are available on request through our team.

Red Oak or White Oak

Our white oak is Appalachian white oak, Quercus alba, grown in the northern United States. Compared with other white oak species, it has more consistent colour variation, a tight grain and a honey tone when finished, as described on the white oak 6' to 10' page.

Unfinished red oak is offered in the same widths, cuts, length ranges and formats, so the choice between the two comes down to the look you want once the floor is finished on site. Many New York townhouses already have oak floors, and matching a new room to an old one is easier when the species is the same.

Six Length Ranges

Both species are offered in six length ranges: 1' to 8' with an average of 3.25', 2' to 10' averaging 4', 3' to 10' averaging 5', 4' to 10' averaging 6', 5' to 10' averaging 7', and 6' to 10' averaging 8'. The red oak 5' to 10' sits near the long end.

Longer averages mean fewer end joints, which gives a calmer floor in a long living room or a loft. Shorter ranges suit smaller rooms, hallways and stairs, where long boards are hard to carry in. Pair the length with the room, and with the scale of any pattern floor next to it, such as our unfinished herringbone.

Choosing a length range and cut? Send us your room sizes and we will suggest the planks that fit the space.

Solid, 2-Layer or 3-Layer Engineered

Each length range comes in three formats: solid, 2-layer engineered and 3-layer engineered, all tongue and groove. The planks are listed at 3/4" thick, and the 2-layer engineered white oak is also offered 5/8" thick.

Solid suits a townhouse with a wood subfloor and plenty of future sanding in mind. Engineered formats are a common choice in apartment buildings, where the subfloor or building rules call for a more stable board. For more on that decision, see our solid hardwood guide, or ask us to review the subfloor before you order.

Widths and Cuts

Widths run 2 1/4", 3", 4", 5", 6", 7", 8" and 9". Each width comes in four cuts: plainsawn, rift only, quartered only, or rift and quartered. Both lists appear on the white oak 3' to 10' page.

Solid quarter or rift sawn oak has a long history over radiant heat and is a good choice for stability in boards wider than 4". The product pages describe rift and quartered oak as superior to plainsawn for a small increase in investment. Our rift and quartered guide covers those cuts in more detail.

Planks Around Parquet: A Wooden Rug

Planks can fill the area between a border and the walls, with parquet installed inside the border. The result looks like a wooden rug, a classic layout in a formal living or dining room. Ordering the planks from the same source as the parquet helps them match in thickness and look, as the red oak 4' to 10' page notes.

Because the planks are unfinished, the field, border and parquet can all be sanded and finished together on site in one colour. For parquet and border ideas to pair with these planks, see our Versailles and parquet guide.

Book a virtual consultation to compare unfinished red oak and white oak side by side.

For American red oak alongside chestnut, cherry, elm and maple planks, see our chestnut, cherry, elm and maple floors guide.

Quick Answers

What length ranges are available?

1' to 8', 2' to 10', 3' to 10', 4' to 10', 5' to 10' and 6' to 10', with averages from 3.25' to 8', as listed for unfinished white oak.

What widths and cuts can I choose?

Widths from 2 1/4" to 9", in plainsawn, rift only, quartered only, or rift and quartered, as listed for unfinished red oak.

Are the planks solid or engineered?

Each length range is offered as solid, 2-layer engineered or 3-layer engineered, all tongue and groove.

What grade are the planks?

They are listed in Select and Better grade, similar to the Clear grade specified by NOFMA and NWFA. Other grades are available on request.

Plan Your Floor

Every plank in this guide is available through our store, and we can review lengths, widths and cuts with you against your rooms and subfloor.

About The Author

Joe Avila has worked in wood flooring for 26 years. He is NWFA certified (CSI, CI, CWFI, CFS) and teaches NWFA continuing-education courses for architects, designers and flooring professionals. Luxury Wood NYC, a Huggins Wood Floor Specialist brand.

Related Reading

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page