top of page

A Guide to Ordering and Comparing Wood Floor Samples

7 days ago
5 min read

Posted November 15, 2026

Samples are the surest way to choose a wood floor, and our store offers unfinished white oak, red oak, walnut and maple samples to compare at home.

Call (908) 232-6600 or book a virtual consultation to review samples and specifications for your project.

A photo on a screen can only tell you so much about a wood floor. Colour shifts with light, grain looks different at full size, and a tone that seems right online can feel wrong beside your own trim. A sample in your hands settles those questions.

This guide covers the samples in our store, how to choose a cut, how to compare samples at home, and how to review prefinished floors with us before you order.

Why Sample Before You Order

A wood floor is one of the largest surfaces in a home, and it is costly to change once it is down. Seeing the real wood first is the simplest way to avoid surprises. Species, grade, cut and finish all change how a floor looks, and our grades guide shows how much grade alone can change.

Samples also help everyone on a project agree. An architect, a designer and a homeowner can hold the same board and talk about the same thing, rather than about a photo that each of them sees on a different screen. Our stain colour guide uses the same approach for colour.

Our Unfinished Species Samples

Our store offers four unfinished samples: white oak, red oak, American walnut and maple. Their pages describe the boards as 3/4" tongue and groove in Select and Better grade, available solid or engineered.

The pages say the boards are custom milled by Luxury Wood NYC on German-made precision molders, with both human and machine inspection for knots and sap. They also note that our Select grade is similar to the Clear grade specified by the NOFMA and NWFA. An unfinished sample shows the bare wood, so you see the species itself before any stain or finish. The walnut sample is the one to order if you are weighing a dark floor.

Choosing a Cut: Plainsawn, Quartered or Rift

The white oak and red oak samples can be ordered in four cuts: plainsawn, quartered only, rift and quartered, or rift only. The cut is how a log is sawn into boards, and it changes the grain you see on the floor.

Plainsawn boards show the broad, arched grain most people picture when they think of oak. Quartered boards show straighter grain, and in oak they can show flecks across the board. Rift boards show the straightest, most even grain. If you are unsure, order more than one cut of the same species and lay them side by side. Our unfinished oak guide covers our unfinished oak planks.

Want help narrowing down samples? Send us photos of your rooms and we will suggest what to order.

Comparing Samples at Home

Lay each sample on the floor of the room where it will go, not on a table. Look at it in the morning, at midday and in the evening, with the lights on and off. A tone that looks warm at night can look grey in north light. Lay the white oak and walnut samples side by side if you are torn between light and dark.

Hold samples beside your trim, doors, cabinets and any stone or tile nearby. Stand back as well as looking closely, since a floor is seen from across a room far more often than from above. If you are planning a stain or oil, remember that an unfinished sample shows the bare wood. Our finish guide explains how each finish changes it.

Reviewing Prefinished Floors with Us

Many of our floors come prefinished, from wide plank to herringbone and chevron. To compare these, book a virtual consultation and we can review samples and specifications for your project with you.

It helps to come with a short list. Note the rooms, the light each one gets, the look you want and any floors you have already liked on our site. Photos of your rooms, trim and furniture make the conversation more useful. We can then point you to the products and finishes worth sampling, so you are not comparing dozens of boards at once. You can book a consultation at any stage.

After You Choose

Once you have chosen, keep your sample. It is a useful reference while the floor is installed and finished, and later when you choose rugs, paint or furniture, or plan your floor care.

If you chose an unfinished floor, the next decision is the finish and colour. Our guides to finishes and stain colours walk through those choices. If you chose a prefinished floor, plan its care from the start, so the finish you picked looks right for years. A short note of the product name and finish, kept with your sample, makes future care much easier.

Book a virtual consultation to review samples and specifications for your project.

Quick Answers

Which samples can I order?

Unfinished white oak, red oak, American walnut and maple, as listed in our store, for example the white oak sample.

Can I choose the cut of an oak sample?

Yes. White oak and red oak samples come plainsawn, quartered only, rift and quartered, or rift only.

What grade are the samples?

The pages describe 3/4" tongue and groove boards in Select and Better grade, solid or engineered.

How do I compare prefinished floors?

Book a virtual consultation and we can review samples and specifications for your project.

Plan Your Floor

Every sample in this guide is available through our store, and we can help you choose which ones to order for your project.

About The Author

Joe Avila has worked in wood flooring for 26 years. He is NWFA certified (CSI, CI, CWFI, CFS) and teaches NWFA continuing-education courses for architects, designers and flooring professionals. Luxury Wood NYC, a Huggins Wood Floor Specialist brand.

Related Reading

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page