top of page

Walnut Floors for Tenafly and Cresskill, New Jersey Homes

6 days ago
4 min read

Posted November 16, 2026

Walnut gives the colonials, Tudors and newer homes of Tenafly and Cresskill a deep, warm floor, and our store carries it prefinished and unfinished.

Call (908) 232-6600 or book a virtual consultation to review samples and specifications for your project.

Tenafly and Cresskill are leafy Bergen County boroughs where colonials, Tudors and Victorians share streets with larger newer homes. Many owners here want a floor that feels rich and settled, and American walnut is one of the most requested woods for that look.

This guide covers the walnut floors in our store, prefinished and unfinished, and how to choose grade, width and pattern. Our American walnut guide covers more of the walnut range.

Why Walnut Suits These Homes

The deep brown tone of American walnut suits the panelled dens, libraries and dining rooms found in many older Bergen County houses. It sits comfortably beside dark trim and brick, and it gives a large open room in a newer house a sense of warmth.

Walnut also pairs well with light walls, which keep a dark floor from making a room feel heavy. In a house with big windows and mature trees outside, the light shifts through the day, and a walnut floor shows that change in its grain. Our light or dark guide covers the trade-offs of a darker floor.

American Walnut 1 Natur Wide Plank

American Walnut 1 Natur is a wide plank from the Coswick Classic collection, in 1 Natur grade, and sits in our dark brown colour family. It comes in 5" or 7-1/2" widths and 3/4" or 5/8" thicknesses, as a 3-layer CosLoc single strip or a 3-layer tongue and groove engineered floor.

It can be ordered with a lacquer or silk oil finish. Its page describes the lacquer, CosNanoTech+, as 12 UV-cured lacquer layers with corundum added, protecting the floor from moisture and dirt. The silk oil option gives a softer, more natural look. A busy family kitchen may suit the lacquer, while a quiet living room may suit the oil. Compare both on the product page.

Oak Walnut Wide Plank 5"

For a walnut tone on oak, Oak Walnut Wide Plank 5" is an oak floor from the same Coswick Classic collection, in Select & Better grade with a lacquer finish. It sits in our dark brown colour family.

It is offered as a 3-layer CosLoc single strip or a 3-layer tongue and groove engineered floor, in 3/4" or 5/8" thickness. Because it is oak, its grain is more open than walnut, which gives a dark floor more visible texture. It is worth sampling beside American Walnut 1 Natur if you like a dark floor but are undecided on the species.

Planning a walnut floor in Tenafly or Cresskill? Send us photos of your rooms and we will suggest walnut floors to sample.

Unfinished Walnut, Finished on Site

If you want to set the colour and sheen on site, we also carry unfinished walnut. Walnut Engineered Clear & Character Grade is 3/4" thick, in widths from 2-1/4" to 8-1/4", in clear or character grade, with or without sap.

Its page says the engineered build gives better stability against changes in temperature and moisture. Our unfinished American walnut planks come solid or engineered, in widths from 2-1/4" to 9", and the page notes that all planks are back-channeled. Choosing clear grade gives a calm, even floor, while character grade and sap add contrast, which can suit an older colonial or Tudor.

Walnut in Herringbone and Chevron

Walnut also comes in patterns. Our solid walnut herringbone and solid walnut chevron are unfinished and offered in many sizes, from 2-1/4" x 11-1/4" up to 6" x 36".

Their pages explain that a herringbone depends on accurate milling, since the pattern cannot be kept if piece widths do not add up. They say we use laser-guided precision equipment, with dimensional tolerance not exceeding .005" in the width or profile of any piece. A walnut herringbone or chevron in an entry hall or dining room can give a Tudor or colonial a formal touch.

Choosing Grade, Width and Finish

A wider board, such as a 7-1/2" American Walnut 1 Natur plank, suits a large open room in a newer house. Narrower boards often look more at home in the smaller rooms of an older colonial or Victorian.

Grade changes the look as much as width. A clear or select grade gives a calm floor, while a character grade shows knots and colour changes that suit a relaxed family room. Finish matters too: lacquer is easy to keep clean, while oil gives a softer sheen and can be refreshed. Our finish guide and care guide cover both.

Book a virtual consultation to compare walnut floors for your home.

Quick Answers

What widths does American Walnut 1 Natur come in?

5" or 7-1/2", as listed on American Walnut 1 Natur.

Do you carry unfinished walnut?

Yes. Walnut Engineered Clear & Character Grade is 3/4" thick, in widths from 2-1/4" to 8-1/4".

Is Oak Walnut a walnut floor?

No. Oak Walnut Wide Plank 5" is an oak floor in our dark brown colour family.

Does walnut come in herringbone?

Yes. Our solid walnut herringbone and chevron are unfinished, in sizes from 2-1/4" x 11-1/4" to 6" x 36".

Plan Your Floor

Every walnut floor in this guide is available through our store, and we can help you choose a grade, width and finish for each room of your house.

About The Author

Joe Avila has worked in wood flooring for 26 years. He is NWFA certified (CSI, CI, CWFI, CFS) and teaches NWFA continuing-education courses for architects, designers and flooring professionals. Luxury Wood NYC, a Huggins Wood Floor Specialist brand.

Related Reading

 
 
 

Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page